Elastomer Sleeves

Elastomerhüllen

Elastomer sleeves are available on request for Franke LSA slim bearings. They are used for tolerance compensation and for vibration decoupling. The smooth running can be significantly increased by an elastomer sleeve. Elastomer sleeves for the LSA 6/8 also offer additional sealing of the bearing due to the overlapping of the edges.

 

Size     

Dimensions

mm

Ø D                       Ø d                       M x N
Order-no.  Technical Details
 LSA 4  119,25 - 398,65 97,95 - 377,35 10,65 x 6

101622

 

 Material: NBR

 Operation Temperature: -30 °C bis +80 °C
  

 LSA 6 130,3 - 397  111,1 - 377,8 9,6 x 9,6 102674
 LSA 8  158,81 - 781,11  136,47 - 758,77  11,17 x 10,74 100202

 

 

Elastomer sleeves for Franke slim bearings are available from stock. They can be ordered when you buy a slim bearing and are then included in the delivery. For series production, elastomer sleeves are available by the meter for self-cutting. We recommend gluing the ends with cyanoacrylate glue (e.g. Loctite 406). The use of the elastomer sleeve slightly reduces the stiffness and accuracy of the bearing. The basic static load rating of the bearing also decreases slightly. We would be happy to advise you on the design and construction.