- Bearing assembly in steel design with external gear
- Ready to install, large selection range
- Preloaded free from clearance
- Available on short notice
- Infinitely variable from 100 - 1800 mm
LVD is a bearing assembly with external gear type and housing rings made of steel and integrated bearing element. Franke bearing assemblies in type LVD are designed for medium rotational speeds and accuracies.
They are available on short notice, in some cases even from the warehouse (see table).
Franke bearing assemblies type LVD are ready-to-use, complete bearings with integrated Wire Race Bearings. Designed as 4-point bearings, they absorb equal load from all sides and are insensitive to impact and vibration. The bearing assemblies are sealed on both sides and set free from clearance and are preloaded. On request you can receive the bearing assemblies ex works with your specified preload values.
|Material||Inner ring: C45N, outer ring: 42CrMo4V, ball race rings: 54SiCr6, rolling elements: 100Cr6, cage: PA12, seal: NBR|
|Gear||DIN 3967, quality 8e25|
|Temperature in use||–20 °C to +80 °C, briefly up to +100 °C|
|Circumferential speed||max. 5 m/s, without seals max. 10 m/s|
|Screw connect||see Technical information|
|Lubricant grease||Shell Gadus S3 V220C2|
|Relubrication||using grease nipples according to DIN 3405|
|Lubrication schedule||see Technical information|
Technical information / calculation
Please find additional information on bearing selection, calculation, mounting and setting in 'Technical information'. Our technical consultants are pleased to assist you in identifying the correct bearing assembly for your application.
Please call us under: +49 7361 920-0 or send us an email at: firstname.lastname@example.org