Bearing Assemblies

Characteristics

Bearing type

  • Bearing assembly in aluminum design with rollers

Characteristics

  • Ready to install
  • Preloaded free from clearance

Diameter range

  • from 200 - 400 mm

In detail

Bearing type

LVG is a 2-row angular roller bearing with aluminum housing and two integrated bearing elements. Franke bearing assemblies type LVG are suitable for highest load capacities. They convince by high rigidity, low rotational resistance and low weight.

Characteristics

Franke bearing assemblies type LVG are ready-to-use, complete bearings with integrated Wire Race Bearings. Designed as roller bearings, they absorb equal load from all sides and are insensitive to impact and vibration. The bearing assemblies are sealed from both sides and adjusted free from clearance. Due to the housing parts made of aluminum the weight is reduced by 60% compared to steel bearings.

Technical Details

Material Inner / Outer ring: ALZnMgCu0,5, ball race rings: CrSi70, rolling elements: 100Cr6, cage: POM, seal: NBR
Temperature in use –30 °C to +80 °C, briefly up to +100 °C
Circumferential speed max. 4 m/s
Screw connection see technical information
Lubricant grease Klüber Isoflex Topas NCA52
Relubrication using grease nipples according to DIN 3405
Lubrication schedule see Technical information

Technical information / calculation

Please find additional information on bearing selection, calculation, mounting and setting in 'Technical information'. Our technical consultants are pleased to assist you in identifying the correct bearing assembly for your application.

Please call us under: +49 7361 920-0 or send us an email email at: info@franke-gmbh.de.