Bearing Assemblies


Bearing type

  • Bearing assembly in steel design
  • Integrated double-row angular ball bearing


  • Ready to install, wide selection range
  • Preloaded free from clearance
  • For high speed and acceleration

Diameter range

  • Infinitely variable from 100 - 1800 mm

In detail

Bearing type

LVC is a bearing assembly designed as double-row angular contact ball bearing made of steel with two integrated bearing elements. Franke bearing assemblies in type LVC are suitable for the highest circumferential speeds. Convincing aspects include their high dynamism and low rotational resistance.


Franke bearing assemblies type LVC are ready-to-use, complete bearings. The double-row angular contact ball bearing in 4-point adjustment is preloaded free of clearance. It is insensitive to impact and vibration. The low rotational resistance and the minimal breakaway torque reduce the necessary drive power. Bearing assemblies type LVC operate practically without maintenance and achieve a high service life due to the low friction values.

Technical details


Material Inner / outer ring C45N, ball race rings: 54SiCr6, rolling elements: 100Cr6, cage: PA12
Temperature in use –20 °C to +80 °C, briefly up to +100 °C
Circumferential speed max. 20 m/s
Screw connection see Technical information
Lubricant grease Shell Gadus S3 V220C2
Relubrication using grease nipples according to DIN 3405
Lubrication schedule see Technical information

Technical information / calculation

Please find additional information on bearing selection, calculation, mounting and setting in 'Technical information'. Our technical consultants are pleased to assist you in identifying the correct bearing assembly for your application.

Please call us under: +49 7361 920-0 or send us an email at: