Bearing Assemblies


Bearing type

  • Bearing assembly in aluminum design / toothed belt gear


  • Ready to install, large selection range
  • Perloaded freee from clearance
  • Available on short notice

Product range

  • Infiniteley variable from 100 - 1800 mm

In detail

Bearing type

LVE is a bearing assembly with toothed belt gear type and housing rings made of aluminium and integrated bearing element. Franke bearing assemblies in type LVE are designed for medium rotational speeds and accuracies.

They are available on short notice, in some cases even from the warehouse (see table).


Franke bearing assemblies type LVE are ready-to-use, complete bearings with integrated Wire Race Bearings. Designed as 4-point bearings, they absorb equal load from all sides and are insensitive to impact and vibration. The bearing assemblies are sealed on both sides and set free from clearance and are preloaded. On request you can receive the bearing assemblies ex works with your specified preload values.

Technical details


Material Inner / outer ring: AIZnMgCu05, ball race rings: 54SiCr6, rolling elements: 100Cr6, cage: PA12, seal: NBR
Gear AT10
Temperature in use –20 °C to +80 °C, briefly up to +100 °C
Circumferential speed max. 5 m/s, without seals max. 10 m/s
Screw connection see Technical information
Lubricant grease Shell Gadus S3 V220C2
Relubrication using grease nipples according to DIN 3405
Lubrication schedule see Technical information

Technical information / calculation

Please find additional information on bearing selection, calculation, mounting and setting in 'Technical information'. Our technical consultants are pleased to assist you in identifying the correct bearing assembly for your application.

Please call us under: +49 7361 920-0 or send us an email at: