Rolling bearings for mechanical engineering guide rotating or swivelling assemblies in machines and systems and transmit forces and moments in the process. Typical locations are tool changers, swivel and rotary tables, handling units and winding machines.
Requirements in mechanical engineering
In mechanical engineering, load capacity, precision and service life matter equally. Rolling bearings have to absorb vibration, changing loads and high accelerations while positioning workpieces or tools with high repeatability. Design constraints add to this: installation space is often tight, the drive should take up as little room as possible, and chips or coolant must not reach the raceways.
Examples from practice
- Tool changer: In the machining centre, a slewing ring feeds the tools to the machining head. A customised slewing ring with gearing, type LVD, is used in the diameter range 630 to 1092 mm. A labyrinth seal and a lip seal protect the raceways, and the preload ensures high accuracy and uniform rotational resistance. More in the tool changer application example.
- Swivel station in a placement machine: The task is a 180° rotation in no more than 0.4 seconds with a cycle of 1.0 seconds. A slewing ring with integrated direct drive, type LTD, eliminates toothed belts, pinions and gearboxes. More in the swivel station application example.
- Textile winding machine: A customised slim bearing of type LSA sits in the compact drum. Adapted race rings create a defined preload that compensates for vibration during winding.
Franke rolling bearings for mechanical engineering
In Franke wire race bearings, the rolling elements do not run on solid rings but on inserted race wires. The surrounding structure can therefore be made from different materials, such as aluminium or stainless steel, and adapted to the available installation space. The large centre clearance leaves room for the drive. Wire race bearing elements are available with diameters from 30 to 9,000 mm, slewing rings from 60 to 2,000 mm. On request, Franke supplies its rolling bearings as ready-to-install assemblies. Further examples can be found in the mechanical engineering applications, and an overview of all solutions on the page Franke in mechanical engineering.
Franke also manufactures bearings individually to your specifications: Individual bearing program
Frequently asked questions about bearings for mechanical engineering
Which types of rolling bearings are used in mechanical engineering?
Mechanical engineering mainly uses deep groove ball bearings, angular contact ball bearings, cylindrical roller bearings and tapered roller bearings; for large, flat rotary axes such as rotary tables, swivel stations or tool changers, four-point bearings and slewing rings are added. Franke supplies wire race bearings for these axes, whose rolling elements run on inserted race rings of hardened spring steel. Because the surrounding structure can be designed freely, housings made of aluminium, stainless steel, carbon or 3D-printed material are possible, as the page Franke principle explains.
What information do you need to design a rolling bearing for a machine?
To design a rolling bearing for mechanical engineering, Franke needs the forces and moments acting at standstill and during rotation, the speed, environmental influences such as temperature and humidity, and special operating conditions such as cleanroom or vacuum. These data determine the design, size and preload of the rolling bearing. The list of required data is also given in the FAQ on rolling bearings.
How are rolling bearings in machines protected against chips and coolant?
Rolling bearings in mechanical engineering are protected against chips, dust and coolant by seals, for example lip seals, labyrinth seals or radial shaft seals. On Franke slewing rings of type LVD, the housing rings are sealed on both sides, with NBR as standard and FKM (Viton) as an alternative, for operating temperatures from −20 to +80 °C. The individual programme offers further seal types such as ring spring seals or high-pressure seals. Data sheet and materials are on the page slewing ring type LVD.
How often does a rolling bearing in a machine need to be relubricated?
In mechanical engineering, relubrication intervals depend on peripheral speed and environment. For wire race bearings, Franke recommends relubrication every 5,000 hours at 0 to below 3 m/s, every 1,000 hours at 3 to below 5 m/s, every 600 hours at 5 to below 8 m/s and every 200 hours at 8 to below 10 m/s. Slewing rings are relubricated via grease nipples to DIN 3405.
Can a rolling bearing with direct drive replace a gearbox in a machine?
Yes, a rolling bearing with an integrated direct drive can replace toothed belts, pinions and gearboxes in mechanical engineering. In the Franke slewing ring of type LTD, the torque motor sits directly in the slewing ring housing; this reduces maintenance, increases efficiency and extends the speed range and positioning accuracy. An absolute measuring system is fitted as standard, an incremental measuring system is optional. Details are on the page slewing ring with direct drive type LTD.