Ball bearing for supporting equally high loads from all directions.
A four-point contact bearing is a ball bearing in which each ball touches the raceways at four points: two on the inner ring and two on the outer ring. This allows a single bearing to support radial and axial loads from both directions as well as tilting moments.
A four-point contact bearing consists of an inner ring and an outer ring, each with a ball raceway. The balls are arranged at an angle of 45 degrees and touch each ring at two points. This enables the bearing to support both radial and axial forces without deformation or damage.
Four-point bearings are used in a variety of applications, such as in the automotive industry, aerospace, medical technology, robotics and many other areas. They are particularly suitable for applications where high loads and forces act on the bearing and precise positioning is required.
Franke also manufactures bearings individually to your specifications: Individual bearing program
Frequently asked questions about four-point contact bearings
How does a four-point contact bearing work?
A four-point contact bearing is a ball bearing that supports equally high loads from all directions: radial and axial forces as well as tilting moments. Each ball touches the raceways at four points, two on the inner ring and two on the outer ring.
What are the advantages of a four-point contact bearing?
Because a single four-point contact bearing takes loads from all directions, it can replace a combination of several rolling bearings, saving installation space and weight. Franke slewing rings in four-point design are also insensitive to shocks and vibrations.
Is a four-point bearing the same as a four-point contact ball bearing?
Yes. Four-point bearing, four-point contact bearing and four-point contact ball bearing all describe the same design: a ball bearing with four contact points per ball. The names simply emphasise either the four contact points or the ball as rolling element.
How is a Franke four-point contact bearing constructed?
In Franke designs, the balls run on four wires made of hardened spring steel that are inserted into the housing rings. This wire race principle absorbs shocks and vibrations. The rolling bearings are set free of clearance with preload, and their torque resistance can be adjusted.
Which Franke slewing rings are designed as four-point contact bearings?
The ready-to-install slewing rings type LVA with steel housing rings and type LVB with aluminium housing rings are designed as four-point contact bearings. Both have integrated wire race bearings, are sealed on both sides and are set free of clearance with preload.