Glossar

Large ball bearings

Large ball bearings are ball bearings designed for large loads, high tilting moments or large diameters. Their diameters range from several hundred millimetres to several metres.

Designs

Large ball bearings are often designed as four point contact bearings or as double row angular contact ball bearings. A four point contact bearing takes up radial and axial forces as well as tilting moments with a single row of balls and is therefore the typical design of ball slewing rings. For even higher loads, rollers are used instead of balls; such bearings belong to the large diameter bearings.

Lubrication and maintenance

Large ball bearings are usually sealed on both sides and relubricated via grease nipples. Regular inspection, for example of seals, torque resistance and tilting clearance, ensures a long service life.

Large ball bearings at Franke

Franke wire race bearings are available as bearing elements in a diameter range from 30 to 9,000 mm. Because the balls run on inserted wire race rings, the surrounding construction can stay light even with large diameters. Ready to install, Franke offers:

The comparison at a ball circle diameter of 1,000 mm shows how much weight this saves: LVB weighs 36.4 kg, LVA 95 kg.

Fields of application

Large ball bearings work in cranes, excavators and conveyor technology, in wind turbines and in rotary tables. Franke wire race bearings with large diameters are used, for example, in CT scanners, in robots and in measuring and testing technology.

Frequently asked questions about large ball bearings

When is a ball bearing considered large?

There is no standardised limit. The term refers to ball bearings with diameters from several hundred millimetres to several metres that take up large loads and tilting moments.

Which designs are common for large ball bearings?

Mainly four point contact bearings and double row angular contact ball bearings. For very high loads, roller slewing rings are used.

How large can a Franke ball bearing be?

Franke bearing elements are available in a diameter range from 30 to 9,000 mm. Slewing rings can be selected continuously between 60 and 2,000 mm.

Which forces does a large four point contact bearing take up?

Radial and axial forces in both directions as well as tilting moments, with only one row of balls.

How are large ball bearings lubricated?

Usually via grease nipples. Franke slewing rings LVA and LVB are sealed on both sides and relubricated via grease nipples according to DIN 3405.

Matching products from the Franke standard range: Ball bearing type LVA | Ball bearing type LVB | Angular contact ball bearing type LVC

Franke also manufactures bearings individually to your specifications: Individual bearing program