Ball bearing that mainly takes up loads in the radial direction.
Radial ball bearings mainly take up radial forces. The best known design is the deep groove ball bearing; angular contact ball bearings and four point contact bearings also belong to this group. Radial ball bearings consist of an inner and an outer ring between which balls roll in raceway grooves, guided by a cage.
Distinction from the thrust bearing
Whether a ball bearing counts as a radial or a thrust bearing depends on the nominal contact angle: according to ISO 281, radial bearings have a contact angle of up to 45 degrees, thrust bearings a larger one.
Designs
- Deep groove ball bearings: take up axial forces in both directions in addition to radial forces, simple design and widely used
- Angular contact ball bearings: higher axial load capacity in one direction thanks to the contact angle, often installed in pairs or as double row bearings
- Four point contact bearings: balls contact the rings at four points, take up radial and axial forces in both directions as well as tilting moments
Fields of application
Radial ball bearings work in electric motors, gearboxes, pumps, vehicles and in almost all rotating machines.
Radial ball bearings at Franke
Franke wire race bearings are designed as four point contact bearings. They take up radial and axial forces as well as tilting moments at the same time and need only one row of balls and little installation space. More on this in the Franke principle. If you need to take up combined loads in a compact design, you will find suitable solutions in the ball bearing type LEL, the ball bearing type LER and the slim bearing type LSA.
Frequently asked questions about radial ball bearings
What is a radial ball bearing?
A ball bearing that mainly takes up radial forces. Typical designs are deep groove ball bearings, angular contact ball bearings and four point contact bearings.
Is a radial ball bearing the same as a deep groove ball bearing?
No. The deep groove ball bearing is the best known design of radial ball bearing. Angular contact ball bearings and four point contact bearings also belong to this group.
Can a radial ball bearing take up axial forces?
Yes. Deep groove ball bearings take up axial forces in both directions, angular contact ball bearings mainly in one direction, four point contact bearings in both directions.
What is the difference between radial and thrust ball bearings?
The nominal contact angle. Radial bearings have a contact angle of up to 45 degrees, thrust bearings a larger one and mainly take up axial forces.
Which Franke bearings take up radial and axial forces?
All Franke wire race bearings. Thanks to the four point geometry, they take up radial and axial forces as well as tilting moments from all directions.
Matching products from the Franke standard range: Ball bearing type LEL | Ball bearing type LER | Slim bearing type LSA
Franke also manufactures bearings individually to your specifications: Individual bearing program