Device for X-raying objects, used in medicine, research, materials testing and security technology.
In an X-ray machine, bearings move the X-ray tube, the detector and the imaging unit. In a C-arm, the imaging unit swivels around the patient; in a CT scanner, it rotates continuously around the patient. The bearings determine how accurately, quietly and evenly these movements take place.
Requirements
- smooth running free of clearance for sharp images
- quiet, low vibration operation, because patients and staff are right next to the device
- large diameters with a free centre, for example for the patient opening
- reliable absorption of high tilting moments in every position
- low weight for moving and hand guided assemblies
Designs at Franke
Franke uses wire race bearings in X-ray machines, either as a bearing element directly in the housing parts or as a ready to install slewing ring. On the C-arm it is a four point contact bearing designed as a segment bearing, in the CT scanner the double row slewing ring LVC.
C-arm: wire race bearing as a segment bearing
The imaging unit encloses the patient table in an arc and should be easy to swivel evenly by hand. On the C-arm, Franke uses the bearing element LEL as a segment bearing: the race ring segments are integrated directly into the housing parts, which saves space and costs. The segment bearing is set free of clearance, can be moved by hand with a defined resistance and runs quietly. The four point contact bearing reliably takes up the high moments in every position. More in the application example C-arm X-ray machine.
CT scanner: whisper bearing with elastomer
In the CT scanner, the gantry with tube and detector rotates continuously around the patient. The main bearing must run quietly and with low vibration even at high speeds. Franke uses customer specific, patented whisper bearings with elastomer there; depending on design and diameter, radial and axial runout are within a few hundredths of a millimetre. As slewing ring type LVC, the bearing runs extremely smoothly up to 300 rpm, and the elastomer dampens the noise to 60 dBA. The torque resistance is below 20 Nm, the inner and outer rings are electrically insulated, and loads above 1,000 kg are possible. More in the application example CT scanner.
Frequently asked questions about bearings in X-ray machines
Which bearings does Franke use in X-ray machines?
Wire race bearings: on the C-arm the bearing element LEL as a segment bearing, in the CT scanner the slewing ring LVC as a whisper bearing with elastomer.
Why do bearings in X-ray machines have to be free of clearance?
Clearance leads to inaccurate positions and uneven running. This impairs the images.
How is the bearing on the C-arm designed?
At Franke as a segment bearing with LEL bearing elements whose race ring segments are integrated directly into the housing parts. The C-arm can be swivelled by hand free of clearance and with a defined resistance.
How quiet is a Franke bearing in a CT scanner?
The slewing ring LVC runs extremely smoothly up to 300 rpm, and the elastomer dampens the noise to 60 dBA.
How accurately does a Franke CT bearing run?
Depending on design and diameter, radial and axial runout are within a few hundredths of a millimetre. The bearings can be adjusted according to customer requirements.
Matching products from the Franke standard range: Ball bearing type LEL | Angular contact ball bearing type LVC
Franke also manufactures bearings individually to your specifications: Individual bearing program